Due to the large size and specification of the high-speed isolation pier mold, it is generally made by cast-in-place method, which is suitable for various environments. When we make the mold, we should also set up relevant safety signs to remind the traffic and not affect the traffic. The usage of isolation pier mold, Lichang mold and highway isolation pier mold is increasing, and we also have strict technical concept. When pouring, we should ensure the smoothness of the road surface, so that our concrete products can be more simple and rapid when demoulding. Customers can provide drawings for customization, so that the specification and size of our production will be more standard. When the molds are put into the warehouse, qualified samples and qualified documents should be put into the warehouse. The storage room should be provided with sufficient lighting and enough space for workers to transport the molds.
亚博足彩In order to be more convenient to use, the high-speed isolation pier mold has a turning edge welded on one side of the mold. This design is very convenient to use when demoulding. It can be demoulded in time, and it will not be deformed after repeated use. In order to improve the production efficiency, we can start from the production process to make our production more automatic and mechanized, especially the mechanical equipment used. We should ensure the safety of its use, for example, the control is not safe during operation, so we need to reform our production technology to ensure its reliability, so as to ensure its reliability in production It works when you make blocks. Professional paint should be used when painting high-speed isolation pier mold to avoid chemical reaction between ordinary paint and the surface of cement isolation belt, which will lead to paint surface falling off. We should do one-time molding when spraying paint, so as to ensure that its use time is longer and can be used normally in some specific environment.